Renault Megane 4 phase 2
Fitting diagram
² Seat which does not allow a child seat to be fitted.
Child seat fitted using the ISOFIX mounting
Seat which allows an ISOFIX child seat to be fitted.
± The rear seats are fitted with an anchorage point which allows a forward-facing ISOFIX child seat with universal approval to be attached. The anchorage points are located on the backs of the rear seats.
RISK OF DEATH OR SERIOUS INJURY: before fitting a child seat in the front passenger seat, make sure that the front passenger airbag has been deactivated. CHILD SAFETY: deactivating, activating airbag front passenger.
Using a child safety system which is not approved for this vehicle will not correctly protect the baby or child. They risk serious or even fatal injury.
Check that your child is always strapped in and that the belt or safety harness used is correctly set and adjusted. SEAT BELTS.
If necessary, adjust the seat position accordingly.
The table below summarises the information already shown on the diagram on the previous pages, to ensure the regulations in force are respected.
Type of child seat | Weight of the child | Seat size [Gabarit] | Front passenger seat | Rear side seats | Rear centre seat |
Carrycot fitted across the vehicle Group 0 | < 10 kg | L1 [F] L2 [G] | X | X | X |
Rear-facing shell seat Groups 0 or 0 + | < 13 kg | R1 [E] | X | IL (1) | X |
Rear-facing seat Groups 0 + or 1 | < 13 kg and 9 to 18 kg | R3 [C] R2 [D] | X | IL (1) | X |
Forward-facing seat Group 1 | 9 to 18 kg | F3 [A] F2 [B] F2X [B1] | X | IUF - IL (2) | X |
Booster seat Groups 2 or 3 | 15 to 25 kg and 22 to 36 kg | B2 | X | IUF - IL (2) | X |
Seat i-Size | X | i-U | X |
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a child seat in the front passenger seat, make sure that the front passenger airbag has been deactivated. CHILD SAFETY: deactivating, activating airbag front passenger.
X = Seat not suitable for fitting child seats ISOFIX.
IUF/IL = On equipped vehicles, seat which allows an approved “Universal/semi-universal” or “vehicle specific” child seat to be attached using the ISOFIX system; check that it can be fitted.
i-U = Suitable for the i-Size restraint devices in the “universal” forward-facing and backward-facing category.
(1) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the child seat.
(2) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the child seat. REAR HEADRESTS. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child’s legs.
The size of the ISOFIX child seat is indicated by a letter:
- F3, F2, F2X [A, B, B1]: for front-facing seats of group 1 (from 9 to 18 kg);
- R3, R2 [C, D]: rear-facing shell seats or seats of group 0+ (below 13 kg) or of group 1 (from 9 to 18 kg);
- R1 [E]: rear-facing shell seats of group 0 (below 10 kg) or 0+ (below 13 kg);
- L1, L2 [F, G]: carrycots of group 0 (below 10 kg);
- [B2]: boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg).