Renault Arkana
Position for use
Raise the headrest as far as possible until it locks. Check that it is correctly locked.
To remove the headrest
Raise the headrest as far as it will go, then press button 1 and remove the headrest.
Note : The headrest 2 is fixed and can’t be raised.
To refit the headrest
Fit the rods into their housing and push down the headrest until it locks to set it to raised position.
Check that the bonnet is correctly locked.
warning
The headrest is important for safety. Ensure that it is in place and in the correct position : the top of the headrest should be as close as possible to the top of the head and there must be a minimal distance between the head and the headrest.
Folding positions
Press the button 1 and lower the headrest completely.
Fixed headrest 2 for the rear center seat
When the headrest is set at the lowest position, this is for storage only. It should not be in this position when a seat is occupied.
warning
The headrest is a safety component ; check that it is fitted and in the correct position.