Renault Kangoo E-Tech electric

Trip computer A and B

Depending on the vehicle, this includes the following functions:

• mileage;
• trip settings;
• information messages;
• operating fault messages (related to the warning light);
• warning messages (related to the warning light);
• vehicle settings customisation menu Vehicle settings personalisation menu.

Vehicle fitted with trip computer A

Press the switch 1 as many times as required to reach the "Vehicle" tab 5.

Press repeatedly using control 2 or 3, then if necessary use the 4 "OK" switch.

The functions are distributed in zone 6, 7, 8 or 9.

Select the functions of zone 6 by repeatedly pressing switch 2 or 3, then confirm if necessary by pressing the 4 "OK" switch.

Vehicle fitted with trip computer B

The functions are distributed from zone 10, 11, 12 or 13. Select the functions of zone 10 by repeatedly pressing switch 2 or 3, then confirm if necessary by pressing the 4 "OK" switch.

Selections

(the display depends on the vehicle equipment and country)

From the vehicle tab:

a) trip settings:

• average energy consumption since the last reset and current energy consumption;
• distance travelled since last reset.

b) reset the pressure of the tyres;

c) time (depending on the vehicle);

d) service interval, only with contact;

e) only when stationary, vehicle settings customisation menu Vehicle settings personalisation menu.

From the message tab:

f) trip log, operating faults and information messages.

Resetting the journey parameters (reset button)

With one of the trip settings selected as the display, press and hold switch 4 "OK" until the display resets to zero.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

Reading energy consumption values

Some vehicle equipment items consume energy: the energy consumed by the vehicle may therefore differ from the energy consumed on the electric counter.

Interpreting some of the values displayed after resetting

Average energy consumption and speed are all the more stable and meaningful the greater the distance travelled since the last reset.

Resetting the estimated range

After a full recharge of the traction battery, you can select two types of resetting: manual or automatic.

Manual reset

Select one of the trip settings, press and hold the 4 "OK" switch to reset the range.

Automatic reset

The range is automatically reset when the traction battery is fully charged. The calculated value corresponds to an average use, taking into account the exterior temperature. If a particularly economical driving pattern is identified, the calculation is corrected and the range is increased.