Operation

After saving your profile from the multimedia system 1, you can recall the driver's user settings (driving position etc.) using facial recognition when entering the vehicle.

When the driver's door is closed, as soon as the interior camera 2 detects your face and associates it with the face image linked to the "user" profile you have saved, the pre-recorded settings are then activated (driving position, connection to your phone, calendar, etc.).

Note: make sure that the camera is not obscured (by dirt, mud, etc.).

Managing the user profile

warning

For safety reasons, carry out any adjustments when the vehicle is stationary.

After creating a user profile or updating the face image, please wait about 30 seconds after closing the door in order for the multimedia system to register the new information.

Note: it is not possible to register the same face on several profiles.

For more information on storing a profile using facial recognition, please refer to the multimedia user manual.

If you have previously activated the driving position recall from your "user" profile, the seat automatically initiates its movement as soon as your face is recognised, in order to adopt the memorised position.

warning

When the seat is moving into position, you can interrupt it by pressing button 3 or 4.

Remain vigilant.

Limitations of the system operation

Certain conditions may hinder the system's operation, for example:

  • if wearing certain types of glasses;
  • if the camera is obstructed, even partially;
  • if part of the driver's face is hidden (by hair, a surgical mask, scarf, etc.); ;
  • an unsuitable driving position (such as sitting too low, leaning too far back, etc.) that can prevent the camera from properly analysing the face;
  • if wearing reflective clothing;
  • ...

In this case, if the face image is not recognised by the camera 2 during facial recognition, the system suggests the last profile used.