Journey settings

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
Interpreting the display selected
Vehicle Systems OK
a) Trip log.
Successive display:
  • information messages (passenger airbagOFF, etc.);
  • operating fault messages (Check injection, etc.).
7.4 L/100
b) Current fuel consumption.
This value is displayed after a speed of approximately 19 mph (30 km/h) is reached.
5.8 L/100
Average fuel consumption since the last reset.
The value is displayed after having travelled at least 400 metres since the last reset.
112,4 km
c) Trip mileage recorder: distance travelled since the last reset.
123.4 km/h
Average speed since last reset.
The value is displayed after driving 400 metres.
Examples of selections
Interpreting the display selected
Tyre pressure init. long press
d) Reset the tyre pressures.
TYRE PRESSURE LOSS WARNING
16 :30
e) Set the time.
CLOCK AND OUTDOOR TEMPERATURE
Examples of selections
On-board computer with mileage-before-service message
Interpreting the display selected
Service in
30 000 km / 24 months
d) Mileage before service and oil change.
Service distance
With the ignition on and the engine not running, access the "Mileage before service" information. When the distance or time value approaches its limit, there are several possible scenarios:
  • mileage remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
  • if the range is 0 miles (0 km) or if the service date is reached: the "Service required" message is displayed accompanied by the img_1_all_036_1.svg warning light.
The vehicle requires a service as soon as possible.
Service due in
300 km / 24 days
Service required
Reset: to reset the range until the next service, press and hold button OK for approximately 10 seconds until the display shows the range before service permanently.
Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.
Examples of selections
On-board computer with distance before next service message (continued)
Interpreting the display selected
Oil change in
30 000 km / 24 months
f) Mileage before service or oil change.
Mileage before oil change
With the ignition on and the engine not running, access the "Mileage before service" information to display the mileage before the next oil change.
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.
Reset: to reset the distance before the next service, press and hold button OK for approximately 10 seconds until the display shows the mileage before oil change permanently.
Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.
Top Up AdBlue before 2400 km
g) Estimated range with remaining reagent.