Renault Express
Control A is used to adjust the height of the headlight beams according to the load.
Turn control A anticlockwise to lower the beams and clockwise to raise them.
tip
If driving on the left in a left-hand drive vehicle (or vice versa), drivers must have the lights adjusted by an authorised dealer for the duration of the trip.
Table of adjustment position examples
Examples of positions for adjusting the control A according to the load | |
|---|---|
Driver alone or with front passenger | 0 |
Driver with one front passenger and one rear passenger | 1 |
Driver with one front passenger and two rear passengers | 2 |
Driver with one front passenger and two or three rear passengers | 3 |
Driver with one front passenger, three rear passengers and luggage | 3 |
The table below gives some examples. In all cases, adjust the control A according to the vehicle load so that the road can be seen and other drivers are not dazzled.