Attachment via the seat belt

The seat belt must be adjusted to ensure that it is effective in the event of harsh braking or an impact.

Ensure that the strap paths indicated by the booster seat manufacturer are respected.

Always check that the seat belt is correctly fastened by pulling it up, then pulling it out fully whilst pressing on the booster seat.

Check that the booster seat is correctly held by moving it from side to side and back to front: the booster seat should remain firmly fixed in place.

Check that the booster seat has not been installed at an angle.

No modifications may be made to the component parts of the restraint system originally fitted: belts, seats and their mountings.

Do not use the booster seat if it risks loosening the seat belt restraining it: the base of the booster seat must not rest on the buckle and/or catch of the seat belt.

The seat belt must never be twisted or the tension relieved. Never pass the shoulder strap under the arm or behind the back.

Check that the seat belt has not been damaged by sharp edges.

If the seat belt does not operate normally, it will not protect the child. Consult an approved dealer. Do not use this seat until the seat belt has been repaired.