Rear seat belts | راهنمای کاربر

Rear side seat belts

The locking, unlocking and adjustment of the rear side seat belts 8 is carried out in the same way as for the front seat belts.

Check that the rear seat belts are positioned and operating correctly each time the rear bench seat is moved.

Slowly unwind the belt 9.

Click the buckle 10 into the black catch 11.

Fasten the buckle 12 into the red catch unit 13.

Ensure that you always leave the buckle 10 fastened in the catch 11 even if no passenger is present in the centre seat.

The following information applies to the vehicle’s front and rear seat belts.

No modification must be made to the originally-fitted restraint system components (seat belts, seats and their mountings). For special operations (e.g. fitting child seats) please contact an approved dealer.
Do not use devices which give any slack in the belts (e.g. clothes pegs, clips, etc.), as a seat belt which is worn too loosely risks causing injury in the event of an accident.
Never wear the shoulder strap under your arm or behind your back.
Never use the same belt for more than one person and never hold a baby or child on your lap with your seat belt around them.
The belt should never be twisted.
Following an accident, have the seat belts checked and replaced if necessary. Always replace your seat belts as soon as they show any signs of wear.
When the rear bench seat is being put back, make sure that the seat belts and buckles are correctly positioned so that they can be used properly.
Make sure that the seat belt buckle is inserted into the appropriate catch.
Ensure that no objects are placed in the area around the seat belt catch as they could prevent it from being properly secured.
Make sure the seat belt catch is properly positioned (it should not be hidden away, crushed or flattened by people or objects).