Renault Symbioz
Fitting diagram
-
Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.
-
Seat not suitable for fitting child seats.
Child seat attached using the belt
-
Seat equipped for attaching a "universal" approved seat using a seatbelt.
-
Seat enabling a child seat with "B2" approval to be attached by seat belt.
warning
RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger seat, check that the airbag has been deactivated Child safety: deactivating, activating the front passenger airbag.
warning
Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.
warning
Check that your child is always strapped in and that the belt or safety harness used is correctly set and adjusted Seat belts.
If necessary, adjust the seat position accordingly.
Installation table
The table below summarises the information shown on the installation diagram in order to ensure the regulations in force are respected.
Type of child seat | Weight of the child | Front passenger seat | Rear side seats | Rear centre seat | |
|---|---|---|---|---|---|
With airbag deactivated | With airbag activated | ||||
Carrycot fitted across the vehicle Group 0 | < 10 kg | X | X | U (2) | X |
Rear-facing shell seat Groups 0 or 0 + | < 10 kg and < 13 kg | U (1) (5) | X | U (3) | X |
Shell seat/rear-facing seat Groups 0+ and 1 | < to 13 kg and 9 to 18 kg | U (1) (5) | X | U (3) | X |
Forward-facing seat Group 1 | 9 to 18 kg | X | U (5) | U (4) | X |
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | X | U (5) / B2 (6) | U / B2 (4) | X |
warning
(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in this seat, make sure that the front passenger airbag has been deactivatedChild safety: deactivating, activating the front passenger airbag.
X = Seat not suitable for fitting child seats of this type.
U = Seat enabling a child seat with "Universal" approval to be attached by seat belt: check that it can be fitted.
B2 = Boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg/33.1 to 55.1 lbs and 48.5 to 79.4 lbs).
(2) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest the door.
(3) If necessary, position the vehicle seat as far back as possible. Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.
(4) Always retract the headrest of the rear seat on which the child seat is positioned. This action must be performed before fitting the child seat Rear headrests. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.
(5) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).
(6) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°). The child seat must not be in contact with the centre console or the dashboard.
warning
It is prohibited to fit a child seat in the adjacent available seat when the large seatback is folded down onto the other seats Rear seats.