Renault Symbioz
The " My Safety " function can be used to deactivate or activate a set of driving assistance functions simultaneously.
Depending on the vehicle, you can configure the " My Safety " function from the multimedia screen by selecting the driving assistance functions to be switched off simultaneously.
Operation
“ALL ON” mode
Depending on the vehicle, the functions and configurations of driving assistance concerned are:
- overspeed sound alert Detection of road signs;
- lane departure prevention Lane departure prevention;
- driver fatigue warning Driver fatigue warning;
- driver attention warning Driver attention warning;
- emergency lane departure prevention Emergency lane departure prevention.
When "ALL ON" mode is activated, the indicator light on button 1 lights up and the "My Safety All ON selected" message appears on the instrument panel to confirm this. The driving aids that are available in the mode are activated.
"Perso" mode
This mode can be used to deactivate or reactivate some driving functions that are available in "ALL ON" mode if previously configured via the "My Safety Perso" setting.
With the ignition on, press button 1 twice in succession to activate "Perso" mode. On the first press, the "Press again for My Safety Perso" message appears on the instrument panel. On the second press, the indicator light on the button 1 goes out. "Perso" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.
To switch back to "ALL ON" mode, press button 1 once. The indicator light on button 1 lights up.
tip
Depending on the length of time following the last time the engine was stopped, the alerts are reactivated:
- when the vehicle is unlocked;
or
- when a door is opened;
or
- when the engine is restarted.
Perso mode configuration
From the multimedia screen 2
Refer to the multimedia instructions for information on accessing the settings.