Renault Master 4
warning
Do not climb onto the flatbed using the cycle guards, which are situated on both sides of the platform. Risk of falling or serious injury.
warning
The dropside is heavy. When opening do not let it fall heavily, but hold it whilst lowering.
Platform version
To tilt the dropsides, lift the handles 1 located on each side of the dropside.
To tilt the rear dropside, lift the handles 2 located on each side of the dropside.
A side step 3 becomes available when the rear dropside is extended.
Label 4 reminds you that the load on the side step must not exceed 150 kg.
Flatbed version
To tilt the dropsides, lift the handles 5 located on each side of the dropside.
The rear dropside is opened automatically when the tipper is tilted.
To tilt the rear dropside, remove the pin A and lift the levers 6.
Lashing rings
Depending on the vehicle, the lashing rings 7 can be used to retain transported objects.
Universal door
Depending on the vehicle, the universal door 13 allows you to open both doors separately.
Opening the universal door
- Check that the hooks 10 are securely locked on the end pieces 11 of the dropsides.
- Position lock 9 horizontally.
- Pull the handle 8 to unlock and open both doors.
- Lock the tie rods 14 to the end pieces 12 of the dropsides.
Opening the dropside
To tilt the universal door 13, check that the handle 8 is locked in position A and that the hook 10 is unlocked from the end piece 11 of the dropsides.
tip
Before opening the doors, ensure that there is enough space around to allow the doors to be opened.
tip
Do not drive with the doors open. Observe local regulations.
warning
Always position the heaviest items directly on the floor. Use the lashing points on the floor, if these are fitted to the vehicle. The luggage should be loaded in such a way that no items will be thrown forward and strike the occupants if the driver has to brake suddenly.