Rear side seat belts

warning

Check that the rear seat belts are positioned and operating correctly each time the rear bench seat is moved.

  • For the first row of rear seats, it is essential to use seat belts 11;
  • for the last row of rear seats, it is essential to use seat belts 10.

For the first rear row, when belt 11 is not in use, insert the fixed buckle 12 into the catch 13.

For the last rear row, when belt 10 is not in use, insert the fixed buckle 14 into the catch 15.

Conditions of use

Before using the rear side seat belts, make sure that for each one, the fixed buckle 14 is fully clicked into its catch 15.

The belts are then locked and unlocked in the same way as the front seats.

Access to the last row

To facilitate access to the last row of seats, detach the second row seat belt by unlocking it from its catch 16. Insert the detached part of the seat belt into the small bar on the fixed part of the belt.

Remember to lock the seat belt in place once more when a passenger is occupying the seat.

Centre seat belts

tip

Rear seat functions Rear bench seat: functions

warning

Make sure that the bench seats Rear bench seat: functions are locked in position properly so that the seat belts will operate efficiently.

Unwind the seat belt slowly until the buckle locks into the catch 17.

Warning

warning
  • No modification must be made to the originally-fitted restraint system components (seat belts, seats and their mountings). For special operations (e.g. fitting a child seat), please contact an approved dealer.
  • Do not use any devices which slacken the belts (e.g. clothes peg, clip, etc.) as a seat belt which is worn too loosely may cause injury in the event of an accident.
  • Never wear the shoulder strap under your arm or behind your back.
  • Never use the same belt for more than one person and never hold a baby or child on your lap with your seat belt around them.
  • The belt should never be twisted.
  • Following an accident, have the seat belts checked and replaced if necessary. Always replace your seat belts as soon as they show any signs of wear.
  • Make sure that the seat belt buckle is inserted into the appropriate catch.
  • Ensure that no objects are placed in the area around the seat belt catch as they could prevent it from being properly secured.
  • Make sure the seat belt catch is properly positioned (it should not be hidden away, crushed or flattened by people or objects).