Vehicle fitted with trip computer A

Depending on the vehicle, this includes the following functions:

  • mileage;
  • trip settings;
  • information messages;
  • operating fault messages (related to the 1_ALL_036_1_pictogramme.png warning light);
  • warning messages (connected to the 1_ALL_040_1_pictogramme.png warning light).

Press switch 1 as many times as required to reach the "VEHICLE" tab.

Repeatedly press switch 2 or 3.

Selections

(the display depends on the vehicle equipment and country)

a)
Trip log, operating faults and information message readout;
b)
journey settings:
  • average energy consumption;
  • current energy consumption.
  • estimated range with remaining energy;
  • distance travelled;
  • average speed;
c)
trip mileage recorder and average speed;
d)
Reset the tyre pressure
e)
set the time;
f)
distance before service;

Resetting the trip mileage recorder and journey parameters (reset button)

With one of the trip settings selected as the display, press and hold switch 4 "OK " until the display resets to zero.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. However, average consumption can decrease when:

  • the vehicle stops accelerating;
  • the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
  • when driving from an urban area onto the open road.

Vehicle fitted with trip computer B

The functions are distributed in zones 5 and 6.

Press switch 1 to navigate between zones and select the functions by pressing switches 2 or 3 (the display depends on the vehicle equipment and country):

a)
Trip log, operating faults and information message readout;
b)
journey settings:
  • average energy consumption;
  • current energy consumption.
  • estimated range with remaining energy;
  • distance travelled;
  • average speed;
c)
trip mileage recorder and average speed;
d)
Reset the tyre pressure
e)
set the time;
f)
distance before service;

Resetting the trip mileage recorder and journey parameters (reset button)

(depending on the vehicle)

With one of the trip settings selected as the display, press and hold switch 4 "OK" until the display resets to zero.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

Interpreting some of the values displayed after resetting

The greater the distance travelled since the last reset, the greater the stability and reliability of the average energy consumption, range and speed values.

For the first few miles after pressing the reset key you will notice that the range increases as you travel.

This range takes into account the average fuel consumption since the last time the reset button was pressed.

However, the average energy consumption may fall when:

  • the vehicle stops accelerating;
  • the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
  • when driving from an urban area onto the open road.