warning

Make sure that the rod end 1 is supported by the metal part and not the plastic part of the cover.

On equipped vehicles, the luggage net A can be used, when transporting animals or luggage, to separate them from the passenger section.

It can be positioned:

  • behind the front seats;
  • behind a rear bench seat.

Fitting the luggage net behind the front seats

Inside the vehicle, on each side:

Upper mounting:

  • lift and hold the cover 2 using a flat-blade screwdriver to access the mounting hole;
  • fully insert the upper rod 1 of the net into the largest section 3 of the hole;
  • slide the rod into the lower section 4 of the hole.

Lower mounting:

  • attach the net strap hook 5 onto the ring 7 at the base of the bench seat;
  • adjust the net strap so that it is taut.

Removal

Loosen the strap by lifting the adjustment device 6 upwards. Detach the belts.

Fitting the luggage net A behind the rear seats

warning

Make sure that the rod end 1 is supported by the metal part and not the plastic part of the cover.

Inside the vehicle, on each side:

Upper mounting:

  • lift and hold the cover 2 using a flat-blade screwdriver to access the mounting hole;
  • fully insert the upper rod 1 of the net into the largest section 3 of the hole;
  • slide the rod into the lower section 4 of the hole.

Lower mounting:

  • attach the net strap hook 5 onto the ring 8;
  • adjust the net strap so that it is taut.

Removal

Loosen the strap. Detach the belts.