For safety reasons, always wear your seat belt when travelling in your vehicle. You must also comply with the legislation of your country.

Before starting, first adjust your driving position, then ask all occupants to adjust their seat belts to ensure optimum protection.

Adjusting your driving position

- Sit well back in your seat. This is essential to ensure your back is positioned correctly;

- adjust the distance between the seat and the pedals. Your seat should be as far back as possible while still allowing you to fully depress the pedals.

Driver’s side seat belt

Slip your right shoulder under the belt 1.

Incorrectly adjusted or twisted seat belts may cause injuries in the event of an accident.

Use one seat belt per person, whether child or adult.

Even pregnant women should wear a seat belt. In this case, ensure that the lap belt is not exerting too much pressure on the abdomen, but do not allow any slack.

To avoid hampering the proper operation of the side support belt, make sure nothing is positioned between the back 2 of the front seat and the belt 1. Risk of injury in the event of an accident.

Do not use the driver’s side support belt on its own. This belt is designed to complement the action of the seat belt.

Locking

Unwind the belt slowly and smoothly and ensure that buckle 5 locks into catch 4 (check that it is locked by pulling on buckle 5). If the belt jams, allow it to return slightly before attempting to unwind it again.

If your seat belt is completely jammed, pull slowly, but firmly, so that just over 3 cm unwinds. Allow it to return slightly before attempting to unwind it again.

If there is still a problem, contact an approved dealer.

Adjusting the seat belts

Sit with your back firmly against the seatback.

The shoulder strap 3 should be as close as possible to the base of the neck but not on it.

The lap belt 7 should be worn flat over the thighs and against the pelvis.

The seat belt must be worn as close to the body as possible. E.g.: avoid having objects under the belts, etc.

Unfastening

Press button 6 and the seat belt will be rewound by the inertia reel. Guide the belt into position.

- No modification may be made to the component parts of the originally fitted restraint system: belts, seats and their mountings. For special operations (e.g.: fitting booster seats), please contact an authorised dealer.

- Do not use devices which allow any slack in the belts (e.g. clothes pegs, clips, etc.): a seat belt which is worn too loosely may cause injury in the event of an accident.

- Never wear the shoulder strap under your arm or behind your back.

- Never use the same belt for more than one person and never hold a baby or child on your lap with your seat belt around them.

- The belt should never be twisted.

- Following an accident, have the seat belts checked and replaced if necessary. Always replace your seat belts as soon as they show any signs of wear.

- Make sure that the buckle is inserted into the appropriate catch.

- Ensure that no objects are placed in the area around the seat belt catch as they could prevent it from being properly secured.

- Make sure the seat belt catch is properly positioned (it should not be hidden away, crushed or flattened by people or objects).