Settings

To move the seat forwards or back

Raise the handle 1 to unlock. Release the handle at the desired position and make sure that it is locked.

To raise or lower the seat base

Move lever 2 as many times as necessary upwards or downwards.

To tilt the seatback

Lift handle 3 and tilt the seatback to the desired position. Release the handle at the desired position and make sure that it is locked.

To adjust the seat’s lumbar position

Depending on the vehicle:

  • move the switch 4 forwards, backwards, upwards or downwards;

or

  • lower the handle 5 to increase the support and lift it to decrease it.
warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.

Nothing should be placed on the floor (area in front of the driver) as these objects may slide under the pedals during sudden braking manoeuvres, thus obstructing their use.

Table function

Depending on the vehicle, the passenger seatback may be folded down onto the seat base to create a table.

  • Lower the headrest;
  • move the seat back;
  • lift the lever 3 and tilt the seatback forwards as far as possible;
  • pull the handle 6 and lower the seatback fully.
warning

For your safety, attach any transported objects when the seat is in the table position.

When using the passenger seat in table position, you must not use the two rear seats immediately behind it.

warning

After making adjustments, make sure that the seatbacks are correctly locked in place.

warning

When the front seatback is in the table position, you must deactivate the front passenger airbagChild safety: deactivating, activating the front passenger airbag.

Risk of serious injury caused by items resting on the seatback table which may be dislodged when the airbag is deployed.

The label (on the dashboard) and the markings (on the windscreen) remind you of these instructions.

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.

Repositioning the seat

Make sure that nothing prevents the seat from moving.

  • Pull the handle 6 and raise the seatback, ensuring that it locks firmly in place;
  • Reposition the seat base.

Heated seats

Ignition on:

  • a first press on the switch 7 for the seat concerned activates the heating system at maximum power. Both of the built-in warning lights on the switch light up;
  • a second press decreases the heating to minimum power. One integrated warning light is illuminated;
  • pressing for the third time turns the heating off.