Fitting diagram

2_ALL_047_1_pictogramme.png

Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat.

2_ALL_046_1_pictogramme.png

Seat not suitable for fitting child seats.

Child seat attached using the belt

Seat equipped for attaching a "universal" approved seat using a seatbelt.

1_ALL_796_1_pictogramme.png

Seat enabling a child seat with "B2" approval to be attached by seat belt.

warning

RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat on the front passenger seat, check that the airbag has been deactivated Child safety: deactivating, activating the front passenger airbag.

warning

Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.

warning

Check that your child is always strapped in and that the belt or safety harness used is correctly set and adjusted Seat belts.

If necessary, adjust the seat position accordingly.

Installation table

The table below summarises the information shown on the installation diagram in order to ensure the regulations in force are respected.

Type of child seat

Weight of the child

Front passenger seat

Rear side seats

Rear centre seat

With airbag deactivated

With airbag activated

Carrycot fitted across the vehicle

Group 0

< 10 kg

X

X

U (2)

X

Rear-facing shell seat

Groups 0 or 0 +

< 10 kg and < 13 kg

U (1) (5)

X

U (3)

U (3)

Shell seat/rear-facing seat

Groups 0+ and 1

< to 13 kg and 9 to 18 kg

U (1) (5)

X

U (3)

U (3)

Forward-facing seat

Group 1

9 to 18 kg

X

U (5)

U (4)

U (4)

Booster seat

Groups 2 and 3

15 to 25 kg and 22 to 36 kg

X

U / B2 (5)

U / B2 (4)

X

warning

(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in this seat, make sure that the front passenger airbag has been deactivatedChild safety: deactivating, activating the front passenger airbag.

X = Seat not suitable for fitting child seats of this type.

U = Seat enabling a child seat with "Universal" approval to be attached by seat belt: check that it can be fitted.

B2 = Boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg/33.1 to 55.1 lbs and 48.5 to 79.4 lbs).

(2) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest the door.

(3) If necessary, position the vehicle seat as far back as possible. Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.

(4) Always retract the headrest of the rear seat on which the child seat is positioned. This action must be performed before fitting the child seat Rear headrests. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.

(5) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).