The "My Safety" function can be used to deactivate or activate a set of driver assistance functions simultaneously.

Depending on the vehicle, you can configure the "My Safety" function from the multimedia screen by selecting the driving aid functions to be switched off as a group.

Operation

"ALL ON" mode

Depending on the vehicle, the functions and configurations of driving assistance concerned are:

When the "ALL ON" mode is activated, the "My Safety All ON selected" message appears on the instrument panel to confirm this, accompanied by, depending on the vehicle, the indicator light on button 1. The driving aids that are available in the mode are activated.

"Custom" mode

You can use this mode to deactivate or reactivate certain driving aids that are available in the "All ON" mode previously configured using the "MY SAFETY PERSO" setting.

With the ignition on, press the switch 1 twice in quick succession. The first time you press it, the "Press again for My Safety Perso" message is displayed on the instrument panel. On the second press, the warning light on the switch 1 goes out. The "Custom" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.

To switch back to "ALL ON" mode, press once on the button 1. The indicator light on the button 1 lights up.

tip

Depending on the length of time following the last time the engine was stopped, the alerts are reactivated:

  • when the vehicle is unlocked;

or

  • when a door is opened;

or

  • when the engine is restarted.

Configuration of " Custom " mode

From the multimedia screen 2

Refer to the multimedia instructions for information on accessing the settings.