Remove using the hubcap tool 1 (located in the tool kit) by connecting the hook in the recess provided next to the valve 2 (to attach the metal clip).

To refit it, align it with the valve 2. Push the retaining hooks in fully, starting on the side of the valve A, then B and C and finishing at the side opposite the valve D.

Note: if you are using anti-theft bolts Changing a wheel.

warning

Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing to reduce the risk of injury.