Renault Master 4

до
warning

If the vehicle is parked on the hard shoulder with the rear dropside open, the rear lights may be obscured.

You should make other road users aware of your vehicle by using a warning triangle or other equipment specified by the road traffic regulations in the relevant country.

A.
Correct arrangement of the load.
B.
Incorrect arrangement of the load.

Loading instructions

  • Observe standards for the prevention of accidents at work.
  • The material should be loaded into the flatbed or platform without dropping it from a height.
  • Load heavy or hard objects carefully onto the floor of the flatbed or the platform without dropping them from a height.
  • Ensure that the load is correctly distributed on the flatbed or the platform and cannot, in any circumstances, endanger traffic due to the load falling off.
  • Overloading the vehicle is strictly forbidden.
  • Once loading is finished, ensure the side dropsides and tailboard are correctly locked.
  • Carefully observe warnings relating to the use of the flatbed.
  • Do not exceed the permitted load shown on the registration document.
  • Check for correct locking of the dropsides during loading.

Special features of the flatbed version

This label 2 reminds you that during loading and before driving, you must check that the battery disconnection lever 1 is in the " OFF " position.

tip

Do not load when the strut is under pressure and make sure that the platform is firmly supported on the false chassis.

Risk of damage to the strut and platform.

Electric versions

Do not attach any lashing system (e.g. strap, rope, tensioner, etc.) to the side beams 3.

tip

Do not drive with the dropsides open. Observe local regulations.

Unloading instructions

Be careful when opening the dropsides. The load on the flatbed could press against the side board in a dangerous fashion.

warning

The dropside is heavy. When opening do not let it fall heavily, but hold it whilst lowering.

Special features of the flatbed version

It is absolutely forbidden to remove or alter the safety devices, stay, etc.

Check the correct operation of raising and lowering without leaving the control area, so that you can intervene immediately if required.

When unloading:

  • avoid any movement of the tipping body in strong winds;
  • do not park the flatbed when it is loaded;
  • put the safety Stay stand in place before parking the flatbed in the raised position;
  • never place yourself between the platform and the chassis without placing the safety stay correctly.

Note: if the flatbed raises irregularly, stop the operation, lower the flatbed immediately and call an Authorised Dealer.

Before driving at night:

  • check that the flatbed is completely flat;
  • remove the circuit breaker;
  • lock the side and rear side dropsides and make sure the handles are in the closed position;
  • check that the load is secured, does not protrude from the body and does not obstruct the driver's vision.
tip

Flatbed version

After intensive use on an uneven road or on a steep incline, check the hydraulic oil level in the reservoir or have it checked by an approved dealer Oil level, maintenance period.

warning

Before raising the flatbed, ensure there is sufficient clearance to avoid contact with external elements (e.g. power lines, ceilings, beams, etc.).