Transporting objects in the rear load area

Depending on the vehicle, securing rings 1 and 2 can be used to stop transported objects from moving. The number of rings and their locations may vary depending on the vehicle.
Tip
The sole purpose of these rings 1 is to prevent transported objects from moving. The objects must be secured to the mounting rings 2 on the vehicle floor beforehand.
Ensure that the objects being transported are evenly distributed throughout the loading area.

Special note for van version

F max: 400 daN

Transporting objects

WARNING
For your safety, check that all the vehicle’s doors are properly closed before starting the engine.
WARNING
While driving with the right rear hinged door open, always secure transported loads.
The left-hand door, which remains shut, should not be used to hold transported loads in place. Using the right rear hinged door open while driving should only be done in exceptional cases.
In any event, please refer to local legislation.
Risk of loads falling on the road surface.
WARNING
Always position the heaviest items directly on the floor.
Use the lashing points on the luggage compartment floor, if these are fitted to the vehicle. The load should be loaded in such a way that no items will be thrown forward and strike the occupants if the driver has to brake suddenly or while driving on a steep gradient.
Fasten the rear seat belts, even if the seats are not occupied.