warning

If the vehicle is parked on the hard shoulder with the rear dropside open, the rear lights may be obscured.

You should make other road users aware of your vehicle by using a warning triangle or other equipment specified by the road traffic regulations in the relevant country.

Loading instructions

A.

Correct arrangement of the load.

B.

Incorrect arrangement of the load.

  • Observe standards for the prevention of accidents at work.
  • The material must be loaded onto the flatbed or platform at a minimum height.
  • Load heavy or hard objects carefully onto the floor of the flatbed or the platform without dropping them from a height.
  • Ensure that the load is correctly distributed on the flatbed or the platform and cannot, in any circumstances, endanger traffic due to the load falling off.
  • Overloading the vehicle is strictly forbidden.
  • Once loading is finished, ensure the side dropsides and tailboard are correctly locked.
  • Carefully observe warnings relating to the use of the flatbed.
  • Do not exceed the permitted load shown on the registration document.
  • Check for correct locking of the dropsides during loading.

Flatbed version

During loading and before driving, check that the battery isolation lever 1 is in the "OFF " position as shown on label 2.

Platform version

The maximum load on a surface of 80 x 80 mm is 230 kg.

The maximum load on a surface of 50 x 50 mm is 80 kg.

tip

It is forbidden to drive with the rear dropside open. Observe local regulations.

Electric versions

Do not attach any lashing system (e.g. strap, rope, tensioner, etc.) to the side beams 2.

Unloading instructions

Be careful when opening the dropsides. The load on the flatbed could press against the side board in a dangerous fashion.

Do not carry out tipper or platform unloading operations while the dropsides are locked on the unloading side.

warning

The dropside is heavy. When opening do not let it fall heavily, but hold it whilst lowering.

Special features of the flatbed version

Avoid any movement of the tipping body in strong winds.

If the flatbed raises irregularly, stop the operation, lower the flatbed immediately and call an Authorised Dealer.

Be careful when unloading materials (mud etc.) that could stick to the floor of the flatbed. In this case, it is necessary to take all necessary precautions for unloading in order to avoid any dangerous situation.

It is absolutely forbidden to remove or alter the safety devices, stay, etc.

Check the correct operation of raising and lowering without leaving the control area, so that you can intervene immediately if required.

warning

Before raising the flatbed, ensure there is sufficient clearance to avoid contact with external elements (e.g. power lines, ceilings, beams, etc.).

warning

If the rear side board is open the rear lights may be obscured. You should make other road users aware of your vehicle by using a warning triangle or other equipment specified by the road traffic regulations of the country you are driving in.