Renault Zoe Phase 2
Setting the time
Vehicles not fitted with a multimedia screen
Press the switch 1 as many times as required to reach the “Vehicle” tab.
Repeatedly press control 2 or 3 to set the 5 clock.
Press and hold switch 4 “OK” until the time display flashes.
Set the hour using control 2 or 3, then press switch 4 OK to confirm.
Set the minutes using control 2 or 3, then press switch 4 “OK” to confirm.
Vehicles fitted with a multimedia screen
The time and exterior temperature are displayed on the multimedia screen 6.
Please refer to the multimedia instructions for further information.
External temperature indicator
Special note:
When the outside temperature is - 3°C to + 3°C, the °C characters flash (signalling a risk of ice on the road).
If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock must be reset.
We recommend that you do not adjust these settings while driving.
External temperature indicator
As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.