Renault Megane 4 phase 2
Settings
To move the seat forwards or back
Lift handle 1 to release. Release the handle at the desired position and make sure that it is locked.
To raise or lower the seat base
Move lever 2 as many times as necessary upwards or downwards.
To tilt the seatback
Lift handle 3 and tilt the seatback to the desired position. Release the handle at the desired position and make sure that it is locked.
To adjust the seat’s lumbar position
Depending on the vehicle:
- move the switch 4 forwards, backwards, up or down;
or
- lower the handle 5 to increase the support and lift it to decrease it.
For safety reasons, carry out any adjustments while the vehicle is stationary.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
Nothing should be placed on the floor (area in front of driver) as such objects may slide under the pedal during braking manoeuvres, thus obstructing its use.
Table function
Depending on the vehicle, the passenger seatback may be folded down onto the seat base to create a table.
- Lower the headrest;
- move the seat back;
- lift the lever 3 and tilt the seatback forwards as far as possible;
- pull the handle 6 and fully lower the seatback.
When using the passenger seat in table position, you must not use the two rear seats immediately behind it.
For your safety, attach any transported objects when the seat is in the table position.
After making adjustments, make sure that the seatbacks are correctly locked in place.
When the front seatback is in the table position, you must deactivate the front passenger airbag CHILD SAFETY: deactivating, activating airbag front passenger.
Risk of serious injury caused by items resting on the seatback table which may be dislodged when the airbagairbag is deployed.
The label (on the dashboard) and the markings (on the windscreen) remind you of these instructions.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
Repositioning the seat
Make sure that nothing prevents the seat from moving.
- Pull the handle 6 and raise the seatback, ensuring that it locks firmly in place.
- Reposition the seat base.
Heated seats
With the ignition on:
- pressing the switch 7 on the required seat for the first time activates the heating system at maximum power. Both integrated switch warning lights come on;
- a second press decreases the heating to minimum power. One integrated warning light comes on;
- pressing for the third time turns the heating off.