The "My Safety" function can be used to deactivate or activate a set of driver assistance functions simultaneously.

Depending on the vehicle, you can configure the My Safety function from the multimedia screen or from the instrument panel by selecting the driving aid functions to be switched off as a group.

Operation

"All On" mode

Depending on the vehicle, this mode includes the following driving assistance functions:

When the "All On" mode is activated: the indicator light on switch 1 lights up and the "My Safety All ON selected" message is displayed on the instrument panel to confirm activation. The driving aids that are available in the mode are activated.

"Custom" mode

From this mode you can deactivate or reactivate certain driving aids that are available in the "All On" mode previously configured using the "My Safety Custom" setting.

With the ignition on, press button 1 twice in succession to activate the "Custom" mode.

The first time you press it, the "Press again for My Safety Perso" message is displayed on the instrument panel. On the second press, the indicator light on the switch 1 goes out. The "Custom" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.

To switch back to "All On" mode, press once on button 1. The indicator light on switch 1 lights up.

tip

Depending on the vehicle, depending on the length of time following the last time the engine was stopped, the "All On" mode is reactivated:

  • when the vehicle is unlocked;

or

  • when a door is opened;

or

  • when the engine is restarted.

Configuring "My Safety Custom"

Configuration from the multimedia screen 2

Refer to the multimedia instructions for information on accessing the settings.

Configuration from the instrument panel 3

(depending on the vehicle)

  • With the vehicle stationary, press the switch 4 as many times as required to reach the  3_ALL_038_1_pictogramme.png tab or, depending on the vehicle, the 2_ALL_416_1_pictogramme.png  tab;

or

  • press switch 4 and repeatedly press control 5 or 6 to reach the 3_ALL_038_1_pictogramme.png  tab;
  • depending on the vehicle, press switch 7 OK;
  • repeatedly press control 5 or 6 to reach the 3_ALL_108_1_pictogramme.png menu, then press switch 7 OK;
  • repeatedly press control 5 or 6 to reach the "My Safety Perso" menu, then press switch 7 OK;
  • select the driving aids to be deactivated or activated from the "Perso" mode by repeatedly pressing control 5 or 6. Press switch 7OK to deactivate or activate the driving aids.