warning

Before carrying out any action in the engine compartment, you must switch off the ignition Starting, stopping the engine.

warning

Please note when working close to the engine that it may be hot. The engine cooling fan may also start at any moment. The 2_ALL_290_1_pictogramme.png label in the engine compartment reminds you of this.

Risk of injury.

warning

When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.

Risk of injury.

warning

Avoid placing any pressure on the engine bonnet: risk of the bonnet closing by accident.

warning

In the event of even a slight impact involving the radiator grille or bonnet, have the bonnet lock checked by an approved dealer as soon as possible.

warning

After any procedure in the engine compartment, make sure that you do not forget anything (cloth, tools, etc.).

Otherwise, this may lead to engine damage or cause a fire.

Unlocking the bonnet catch

To open, pull the handle 1.

To unlock, push the tab 2 to the left as you open the bonnet.

Opening the bonnet

Lift the bonnet, helping it up, and it will rest in position with the help of struts.

Closing the bonnet

Check that nothing has been left in the engine compartment.

To close the bonnet again, hold the bonnet in the middle and lower it to 30 cm above the closed position, then release it. It will latch automatically under its own weight.

warning

Ensure that the bonnet is properly locked.

Check that nothing is preventing the catch from locking (gravel, cloth, etc.).