Renault Zoe
Trip computer 1
Depending on the vehicle, this includes the following functions:
- distance travelled;
- journey parameters;
- information messages;
- operating fault messages (connected to the warning light ©);
- warning messages (connected to the ® warning light).
All these functions are described on the following pages.
Display selection keys 2 and 3
Scroll through the following information upwards (key 2) or downwards (key 3) by pressing briefly and successively (the display depends on the vehicle equipment and country).
a) total mileage and trip mileage recorder;
b) journey parameters:
- current energy consumption;
- total energy consumption and distance travelled since the last reset;
- average energy consumption and average speed.
c) service interval;
d) tyre pressure reset;
e) trip log, operating faults and information message readout;
f) depending on the vehicle and only when stopped, settings customisation menu:
- clock;
- language;
- automatic locking of the doors while driving;
- rear windscreen wiping in reverse gear;
- switching off the instrument panel when charging;
g) depending on the vehicle and only when stopped, programming menu:
- charging; activation and setting the start time;
- Air conditioning; activation and setting the start time.
Trip mileage resetting
With “trip mileage recorder” selected on the display, press the button 2 or 3 until the mileage recorder resets to zero.
Resetting the journey parameters (reset button)
with the display showing one of the journey parameters, press button 2 or 3 until the display is reset.
Automatic resetting of the journey parameters
Resetting occurs automatically when the maximum value of any of the parameters is exceeded.
Reading energy consumption values
Some vehicle equipment items consume energy: the energy consumed by the vehicle may therefore differ from the energy consumed on the electric counter.
Interpreting some of the values displayed after resetting
The values showing average energy consumption and average speed will become more stable and reliable the further you have travelled since the last time the Reset button was pressed.
Resetting the estimated range
After a full recharge of the traction battery, you can select two types of resetting: manual or automatic.
Manual reset
With one of the trip parameters selected on the display, press and hold one of buttons 2 or 3 to reset the range.
Automatic reset
The range is automatically reset at the end of a full recharge of the traction battery to a value calculated based on the energy consumption over the last 125 miles (200 km).
Some on-board computer information appears on the navigation system display.
Resetting the mileage recorder, the trip settings, etc. is done simultaneously on the on-board computer and the navigation system.