Renault Express

עד

Journey settings

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
Interpreting the display selected
101778 km
a) Total mileage and trip mileage recorder.
112.4 km
Average
b) Trip settings:
Average fuel consumption.
The value is displayed after having travelled at least 400 metres since the last reset.
5.8 L/100
Current
Current fuel consumption.
Value displayed after reaching a speed of 12 mph (20 km/h), depending on the vehicle.
7.4 L/100
Examples of selections
Interpreting the display selected
Range
Estimated range with remaining fuel.
The value is displayed after driving 400 metres.
541 km
Distance
Distance travelled since last reset.
522 km
Average
Average speed since last reset.
The value is displayed after driving 400 metres.
123.4 km/h
56 mph (90 km/h)
c) Current speed (depending on the vehicle).
Examples of selections
Interpreting the display selected
On-board computer with mileage-before-service message
Service distance
Service in
30 000 Km / 12months
d) Distance before service.
With the ignition on, the engine not running and the display set to "Mileage before service", press the button 2 or 3 for approximately five seconds to display the mileage before service (distance or time to the next service). When the distance or time value approaches its limit, there are several possible scenarios:
  • distance or time less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
  • range equal to 0 miles (0 km) or date of service reached: the message "Service required" is displayed accompanied by the warning light img_1_all_036_1.svg .
The vehicle requires a service as soon as possible.
Service due in
300 Km / 24days
Service vehicle
Reset: to reset the distance before the next service, press and hold the button 2 or 3 for approximately 10 seconds until the display shows the mileage before service permanently.
Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.
Examples of selections
Interpreting the display selected
On-board computer with mileage-before-service message
Service distance
Service in
30 000 Km / 12months
d) Battery life before oil change
With the ignition on, the engine not running and the display showing "Mileage before service", press the button 2 or 3 for approximately five seconds to display the mileage before service, then press the button 2 to view the mileage before the next oil change (distance or time remaining before the next service). When the distance or time value approaches its limit, there are several possible scenarios:
  • mileage remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
  • range equal to0 miles (0 km) or date of oil change reached: the message "Service required" is displayed accompanied by the warning light img_1_all_036_1.svg .
The vehicle requires an oil change as soon as possible.
Service due in
300 Km / 24days
Service vehicle
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.
Reset: to reset the mileage before the next service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage before oil change permanently.
Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.
Examples of selections
Interpreting the display selected
Reset tyre pressure, press and hold
e) Reset the tyre pressures.
TYRE PRESSURE MONITORING SYSTEM.
No stored message
f) Trip log.
Successive display:
  • information messages (ESC deactivated/activated, STOP and START activated, etc.);
  • operating fault messages (check injection system, check airbag, etc.).
FILL UP WITH ADBLUE BEFORE 1,488 miles (2,400 km)
g) Estimated range with remaining reagent.
REAGENT TANK.
Examples of selections
Interpreting the display selected
h) Engine coolant temperature.
i) Clock and exterior temperature.
Settings (press and hold)
j) General settings.
Press button 2 or 3 for approximately 5 seconds to select the display language.
Settings
access when the vehicle is stationary
Indicates that to access the "General settings" menu, you must stop the vehicle.