Renault Trafic 3 phase 1
On vehicles fitted with this function, control A allows you to adjust the height of the beams according to the load.
Turn control A downwards to lower the headlights and upwards to raise them.
Load status | Control position |
Unladen, driver only | 0 |
Driver with passenger(s) and luggage compartment full (1) | 2 |
Other cases | According to driver’s judgement |
The table below gives some examples. In all cases, adjust control A according to the vehicle load so that the road can be seen and other drivers are not dazzled. | |
When driving on the left in a lefthand drive vehicle (or vice versa), you must adjust your lights temporarily during your stay.
Temporary adjustment
Open the bonnet and identify the marking B next to one of the front headlight projectors.
For each headlight, using a screwdriver, turn the screw 1 by a quarter turn towards the - symbol to lower the beams.
Return to the starting point once your trip is over: turn the screw 1 by a quarter turn towards the + symbol to raise the beams.