Renault Symbioz
Fitting diagram
Version with front passenger seat equipped with ISOFIX
tip
For the front passenger seat, the use of a child seat with a floor support is recommended to avoid triggering the seat belt warning signal.
warning
Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.
-
Seat which does not allow a child seat to be fitted.
Child seat attached using theISOFIX system
-
Seat equipped for attaching a ISOFIX or i-Size child seat.
The front and rear seats are equipped with an anchorage point allowing an ISOFIX universal forward-facing child seat to be attached. The anchoring points are located on the passenger seatback for the front seat and on the bench seatback for the rear seats.
warning
RISK OF DEATH OR SERIOUS INJURY:
before fitting a rear facing child seat on the front passenger seat, check that the airbag has been deactivated Child safety: deactivating, activating the front passenger airbag.
warning
Fit the child seat in a rear seat wherever possible.
To install an ISOFIX seat in this seat, unbuckle the seat belt by hand before engaging the bolts.
warning
Fitting a seat ISOFIX in the rear-left seat means the middle seat cannot be used. The central seat belt will no longer be either accessible or useable.
Installation table
Version with front passenger seat equipped with ISOFIX
The table below summarises the information shown on the installation diagram in order to ensure the regulations in force are respected.
Type of child seat | Weight of the child | Size of seat [fixture] | Front passenger seat | Rear side seats | Rear centre seat | |
|---|---|---|---|---|---|---|
Without airbag or with airbag deactivated | With airbag activated | |||||
Carrycot fitted across the vehicle Group 0 | < 10 kg | L1 [F] L2 [G] | X | X | X | X |
Rear-facing shell seat Groups 0 or 0 + | < 13 kg | R1 [E] | IL (1) (5) | X | IL (2) | X |
Rear-facing seat Groups 0+ and 1 | < to 13 kg and 9 to 18 kg | R3 [C] R2 [D] | IL (1) (5) | X | IL (2) | X |
Forward-facing seat Group 1 | 9 to 18 kg | F3 [A] F2 [B] F2X [B1] | X | IUF - IL (1) | IUF - IL (2)(3) | X |
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | B2 | X | IUF - IL (4) | IUF - IL (2)(3) | X |
B3 | X | X | X | X | ||
Seati-Size | Rear-facing seat | i - U (1) (5) | X | i - U (2) | X | |
Forward-facing seat | X | i - UF (1) | i - UF (2) (3) | X | ||
Booster seat | X | i - UF (4) | i - UF (2) (3) | X | ||
X = Seat not suitable for fitting child seats.
IUF = Seat allowing a child seat with "Universal or vehicle-specific" approval to be attached using the ISOFIX system on equipped vehicles; check that it can be fitted.
IL = Seat allowing a child seat with "Semi-universal or vehicle-specific" approval to be attached using the ISOFIX system on equipped vehicles; check that it can be fitted.
i-U = Suitable for "Universal" front-facing and rear-facing i-Size restraint devices.
i-UF = Suitable only for "universal" front-facing and rear-facing i-Size restraint devices.
(1) Move the vehicle seat backwards as far as possible and lower it as much as possible, then tilt the seatback slightly (by approximately 25°).
(2) If necessary, position the vehicle seat as far back as possible. Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.
(3) Always retract the headrest of the rear seat on which the child seat is positioned. This action must be performed before fitting the child seat Rear headrests. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.
(4) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°). The child seat must not be in contact with the centre console or the dashboard.
The size of the ISOFIX child seat is indicated by a letter:
- F3,F2,F2X[A, B, B1]: for forward-facing seats in group 1 (9 to 18 kg);
- B2, B3: boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg);
- R3, R2[C, D]: rear-facing seats or shell seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);
- R1[E]: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);
- L1,L2[F,G]: carrycots in group 0 (under 10 kg).
warning
(5) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat to the front passenger seat, check that the airbag has been deactivated Child safety: deactivating, activating the front passenger airbag.
warning
It is prohibited to fit a child seat in the adjacent available seat when the large seatback is folded down onto the other seats Rear seats.
Fitting diagram
Version with front passenger seat not equipped with the ISOFIX
tip
For the front passenger seat, the use of a child seat with a floor support is recommended to avoid triggering the seat belt warning signal.
warning
Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.
-
Seat which does not allow a child seat to be fitted.
Child seat attached using theISOFIX system
-
Seat equipped for attaching a ISOFIX or i-Size child seat.
The front and rear seats are equipped with an anchorage point allowing an ISOFIX universal forward-facing child seat to be attached. The anchoring points are located on the passenger seatback for the front seat and on the bench seatback for the rear seats.
warning
Fit the child seat in a rear seat wherever possible.
To install an ISOFIX seat in this seat, unbuckle the seat belt by hand before engaging the bolts.
warning
Fitting a seat ISOFIX in the rear-left seat means the middle seat cannot be used. The central seat belt will no longer be either accessible or useable.
Installation table
Version with front passenger seat not equipped with the ISOFIX
The table below summarises the information shown on the installation diagram in order to ensure the regulations in force are respected.
Type of child seat | Weight of the child | Size of seat [fixture] | Front passenger seat | Rear side seats | Rear centre seat |
|---|---|---|---|---|---|
Carrycot fitted across the vehicle Group 0 | < 10 kg | L1 [F] L2 [G] | X | X | X |
Rear-facing shell seat Groups 0 or 0 + | < 13 kg | R1 [E] | X | IL (1) | X |
Rear-facing seat Groups 0+ and 1 | < to 13 kg and 9 to 18 kg | R3 [C] R2 [D] | X | IL (1) | X |
Forward-facing seat Group 1 | 9 to 18 kg | F3 [A] F2 [B] F2X [B1] | X | IUF - IL (1)(2) | X |
Booster seat Groups 2 and 3 | 15 to 25 kg and 22 to 36 kg | B2 | X | IUF - IL (1)(2) | X |
B3 | X | X | X | ||
Seati-Size | Rear-facing seat | X | i - U (1) | X | |
Forward-facing seat | X | i - UF (1) (2) | X | ||
Booster seat | X | i - UF (1) (2) | X | ||
X = Seat not suitable for fitting child seats.
IUF = Seat allowing a child seat with "Universal or vehicle-specific" approval to be attached using the ISOFIX system on equipped vehicles; check that it can be fitted.
IL = Seat allowing a child seat with "Semi-universal or vehicle-specific" approval to be attached using the ISOFIX system on equipped vehicles; check that it can be fitted.
i-U = Suitable for "Universal" front-facing and rear-facing i-Size restraint devices.
i-UF = Suitable only for "universal" front-facing and rear-facing i-Size restraint devices.
(1) If necessary, position the vehicle seat as far back as possible. Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.
(2) Always retract the headrest of the rear seat on which the child seat is positioned. This action must be performed before fitting the child seat Rear headrests. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.
The size of the ISOFIX child seat is indicated by a letter:
- F3,F2,F2X[A, B, B1]: for forward-facing seats in group 1 (9 to 18 kg);
- B2, B3: boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg);
- R3, R2[C, D]: rear-facing seats or shell seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);
- R1[E]: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);
- L1,L2[F,G]: carrycots in group 0 (under 10 kg).
warning
It is prohibited to fit a child seat in the adjacent available seat when the large seatback is folded down onto the other seats Rear seats.