new Renault Twingo
Ignition switch
"Stop steering lock applied" position LOCK 0
To lock: remove the key and turn the steering wheel until the steering column locks.
To unlock: turn the key and the steering wheel slightly.
"On" position ON 2
The ignition is switched on:
Any accessories (radio etc.) can be used.
"Start" position START 3
Starting the engine
- Press the brake pedal;
- turn the key to "START" position 3 and release it.
The "READY" message appears on the instrument panel, accompanied by a beep. As soon as the "READY" message stays on and the beep stops, the vehicle is ready to drive.
warning
Never switch off the ignition before the vehicle has stopped completely. Once the engine has stopped, the brake servo, power-assisted steering, etc. and the passive safety devices such as the airbags and pretensioners will no longer operate.
warning
Driver's responsibility when parking or stopping the vehicle
Never leave an animal, child or adult who is not self-sufficient alone in your vehicle, even for a short time.
They may pose a risk to themselves or to others by starting the engine, activating equipment such as the electric windows or locking the doors.
Also, in hot and/or sunny weather, please remember that the temperature inside the passenger compartment increases very quickly.
RISK OF DEATH OR SERIOUS INJURY.
tip
The vehicle can only be started if the charging cable is unplugged. When the charging cable is plugged in, press the brake pedal and then turn the key to "START" position 3 and release it to stop charging and unlock the cable.