Renault Kangoo

The location and operation of equipment may vary according to the vehicle.

1.

USB sockets;

2.

Multimedia screen;

3.

Multimedia socket;

4.

Steering column controls;

5.

Radio.

tip

Please refer to the multimedia instructions for further information.

Multimedia socket 3

10002_XFKEV_266_1_image.jpeg

You can use USB socket to access the multimedia content of your accessories.

The various sources can be selected from the multimedia screen and from the steering column controls.

The sockets USB can also be used to charge accessories with a maximum power of 12 Watts (5 V) per socket.

USB ports 1

10002_XFKEV_101_1_image.jpeg

The USB ports can only be used to charge accessories with a power of up to 12 Watts (5 V) per port.

warning

Connect accessories with a maximum power of 12 watts only.

Fire hazard.

warning
If you connect a cable from an accessory to a USB port (e.g. a smartphone charging cable), be sure to disconnect it when no longer needed.

Risk of short circuit to the USB port in the event of contact between the end of the cable and a metallic object (e.g. cigarette lighter, etc.).

Steering wheel control 6

10002_XFKEV_267_1_image.jpeg

On those vehicles equipped, you can use the "hands-free" telephone 7 and voice recognition 8 controls.

warning

Using the telephone

We remind you of the need to conform to the legislation in force concerning the use of such equipment.

Microphone 9

(depending on the vehicle)

10002_XFKEV_080_1_image.jpeg

Wireless charger - Induction charging 10

(depending on the vehicle)

Passenger compartment storage, fittings

10002_XFKEV_268_1_image.jpeg

Telephone holder 11

10002_XFKEV_081_1_image.jpeg

On equipped vehicles, open the storage compartment A and insert the phone holder into one of the locations 16 while pressing the button 14.

warning

Make sure that the base of the telephone holder is correctly fitted and that the telephone is securely held in place in the telephone holder, so that it is not thrown onto the occupants during sudden turning or braking.

To place your smartphone in the holder 12:

  • move apart the clamps 15;
  • place your smartphone in the phone holder 11 while pressing the clamps 15;
  • release the clips so that the smartphone is held firmly in place.

10002_XFKEV_083_1_image.jpeg

Note: the holder 12 can be repositioned. Use the tightening nut 13 to attach the holder in the desired position.

To remove the telephone holder 11, open the storage compartment A and remove the holder while pressing the button 14.

warning

For safety reasons, carry out any adjustments while the vehicle is stationary.