Renault Kangoo
Manual access ramp
General information
Our new TPRM Kangoo is fitted with an innovative ramp that meets all the standards required for validation and certification. This is located under the vehicle.
To use the ramp properly, it is recommended that you park on flat ground and make sure you have enough space behind the vehicle (no pavement, lamp post, etc.).
warning
To prevent any risk of injury when handling the ramp, ensure that nobody is located near the moving parts. Also check that nothing may obstruct the moving parts and their locking mechanism (body parts, animal, gravel, cloths, toys, etc.).
Maintenance
Frequently inspect and clean the area around the handle to ensure that it works correctly.
Deployment
Park the vehicle on a flat surface, making sure that nothing prevents the ramp from deploying correctly (lamp post, pavement, etc.).
- A.
Use the handle 1 to unlock the flap then open it, guiding it to the ground.
- B.
Hold the handle 2 and pull the ramp 3towards the rear without pulling it upwards until you hear it snap in place.
- C.
Once the ramp is fully extended, press gently on the ramp 3 to remove it from its housing under the vehicle body.
- D.
Pull the ramp 3 until it is fully deployed (E), then guide it to the ground (F).
Storage
- A.
Lift the ramp by holding the handle 1 (E), then push it until your hear the snap as it locks in place (F).
- B.
Unlock the ramp 2 by lifting it slightly and guiding it underneath the vehicle.
- C.
Push the ramp horizontally 2 until it is stored completely underneath the vehicle.
- D.
Fold down the flap and check that it is properly locked on both sides of the vehicle.
Manual foot panel
Remove the manual foot panel 3 from its protective cover located at the feet of the passenger in the second row, then insert the rods 4 into the holes 5.
warning
Before driving the vehicle, make sure you have retracted the manual foot panel.