Renault Zoe Phase 2
Adjusting the steering wheel height and depth
Lower the lever 1 and position the steering wheel in the required position.
Then, raise the lever fully, beyond the point of resistance to lock the steering wheel.
Make sure that the steering wheel is correctly locked.
For safety reasons, only adjust the steering wheel when the vehicle is stationary.
Steering wheel heating
(depending on vehicle)
This function heats the steering wheel 2.
Operating principle
When the temperature is reached, the function regulates the temperature of the heated areas for approximately 30 minutes and then switches off automatically.
Activating the function
With the ignition on, press switch 3, the indicator light in the switch lights up.
Deactivating the function
- Automatic:
The function switches off automatically after the regulation phase of approximately 30 minutes. The indicator light in switch 3 goes out.
Note: if the function has switched off automatically, press the switch 3 twice to reactivate it.
If switch 3 is not pressed again, the function will be reactivated the next time the ignition is switched on.
- Manually:
To deactivate the function during the regulation phase, press the switch 3. The indicator light in switch 3 goes out.
Power-assisted steering
The variable power-assisted steering system is equipped with an electronic control system which alters the level of assistance to suit the vehicle speed.
Steering is made easier during parking manoeuvres (for added comfort) while the force needed to steer increases progressively as the speed rises (for enhanced safety at high speeds).
Never switch off the ignition when travelling downhill, and avoid doing so in normal driving (assistance is not provided).
Never leave the steering wheel on full lock when the vehicle is stationary.
With the engine switched off, or if there is a system fault, it is still possible to turn the steering wheel. The force required will be greater.
A noise may be heard when the steering wheel is moved quickly. This is normal.