Fitting diagram

Front passenger seat version equipped with system ISOFIX (front seats with electric controls)

warning

RISK OF DEATH OR SERIOUS INJURY:

before fitting a rear facing child seat on the front passenger seat, check that the airbag has been deactivated Child safety: deactivating, activating the front passenger airbag.

tip

For the front passenger seat, the use of a child seat with a floor support is recommended to avoid triggering the seat belt warning signal.

2_ALL_046_1_pictogramme.png

Seat which does not allow a child seat to be fitted.

Child seat attached using theISOFIX system

3_ALL_086_1_pictogramme.png Seat which allows an ISOFIX child seat to be fitted.

3_ALL_084_1_pictogramme.png The rear seats are fitted with an anchorage point which allows a front-facing ISOFIX child seat with universal approval to be attached. The anchoring points are located on the passenger seatback for the front seat and on the bench seatback for the rear seats.

warning

Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.

warning

Fit the child seat in a rear seat wherever possible.

To install an ISOFIX seat in this seat, unbuckle the seat belt by hand before engaging the bolts.

warning

Fitting a seat ISOFIX in the rear-left seat means the middle seat cannot be used. The central seat belt will no longer be either accessible or useable.

Installation table

The table below summarises the information already shown on the diagram of the front passenger seat version equipped with the system ISOFIX, in order to ensure that the regulations in force are respected.

Type of child seat

Weight of the child

Seat sizeISOFIX

Front passenger seat (6)

Rear side seats (6)

Rear centre seat (6)

Without airbag or with airbag deactivated

With airbag activated

Carrycot fitted across the vehicle

Group 0

< 10 kg

L1 [F], L2 [G]

X

X

IL (1)

X

Rear-facing shell seat

Groups 0 or 0 +

< 13 kg

R1 [E]

IL (2) (5)

X

IL (3)

X

Shell seat/rear-facing seat

Groups 0+ and 1

< to 13 kg and 9 to 18 kg

R3 [C], R2 [D]

IL (2) (5)

X

IL (3)

X

Forward-facing seat

Group 1

9 to 18 kg

F3 [A], F2 [B], F2X [B1]

X

IUF - IL (2)

IUF - IL (3) (4)

X

Booster seat

Group 2

15 to 25 kg and 22 to 36 kg

[B2, B3]

X

IUF - IL (2)

IUF - IL (3) (4)

X

Seati-Size

i-U (2) (5)

i-UF (2)

i-U (3) (4)

X

X = Seat not suitable for fitting child seats of this type.

IUF/IL = Seat enabling a child seat with "Universal/Semi-universal or vehicle-specific" approval to be attached by ISOFIX (on equipped vehicles): check that it can be fitted.

i-U = Suitable for "Universal" front-facing and rear-facing i-Size restraint devices.

i-UF = Suitable only for "Universal" front-facing and rear-facing i-Size restraint devices.

(1) A carrycot can be installed across the vehicle and it will take up at least two seats. Position the child with his or her feet nearest the door.

(2) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

(3) If necessary, position the vehicle seat as far back as possible and raise the seatback (by approximately 25°). Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.

( 4 ) In all situations, remove the headrest of the rear seat on which the child seat is positioned. This must be done before fitting the child seat (please refer to the "Rear headrests" pages in Section 3 of the vehicle user manual). Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.

The size of the ISOFIX child seat is indicated by a letter:

  • [B2, B3]: boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg);
  • F3, F2, F2X [A, B,B1]: for forward-facing seats in Group 1 (9 to 18 kg);
  • R3 ,R2 ,R2X [C, D]: rear-facing seats or shell seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);
  • R1 [E]: rear-facing shell seats in Group 0 (less than 10 kg) or Group 0+ (less than 13 kg);
  • L1, L2 [F, G]: carrycots in group 0 (less than 10 kg).
warning

(5) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that theairbag has been deactivated Child safety: deactivating, activating the front passenger airbag.

warning

(6) Deactivate the "Easy Access Seat" function before installing a child seat on the front passenger seat and/or on the rear seats.

Risk of injury.

Fitting diagram

Front passenger seat version not equipped with system ISOFIX (front seats with manual controls)

warning

RISK OF DEATH OR SERIOUS INJURY:

before fitting a rear facing child seat on the front passenger seat, check that the airbag has been deactivated Child safety: deactivating, activating the front passenger airbag.

tip

For the front passenger seat, the use of a child seat with a floor support is recommended to avoid triggering the seat belt warning signal.

2_ALL_046_1_pictogramme.png

Seat which does not allow a child seat to be fitted.

Child seat attached using theISOFIX system

3_ALL_086_1_pictogramme.png Seat which allows an ISOFIX child seat to be fitted.

3_ALL_084_1_pictogramme.png The rear seats are fitted with an anchorage point which allows a front-facing ISOFIX child seat with universal approval to be attached. The anchoring points are located on the passenger seatback for the front seat and on the bench seatback for the rear seats.

warning

Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.

warning

Fit the child seat in a rear seat wherever possible.

To install an ISOFIX seat in this seat, unbuckle the seat belt by hand before engaging the bolts.

warning

Fitting a seat ISOFIX in the rear-left seat means the middle seat cannot be used. The central seat belt will no longer be either accessible or useable.

Installation table

The table below summarises the information already shown on the diagram of the front passenger seat version not equipped with the system ISOFIX, in order to ensure that the regulations in force are respected.

Type of child seat

Weight of the child

Seat sizeISOFIX

Manually operated front passenger seat

Rear side seats (6)

Rear centre seat (6)

Carrycot fitted across the vehicle

Group 0

< 10 kg

L1 [F], L2 [G]

X

IL (1)

X

Rear-facing shell seat

Groups 0 or 0 +

< 13 kg

R1 [E]

X

IL (3)

X

Shell seat/rear-facing seat

Groups 0+ and 1

< to 13 kg and 9 to 18 kg

R3 [C], R2 [D]

X

IL (3)

X

Forward-facing seat

Group 1

9 to 18 kg

F3 [A], F2 [B], F2X [B1]

X

IUF - IL (3) (4)

X

Booster seat

Group 2

15 to 25 kg and 22 to 36 kg

[B2, B3]

X

IUF - IL (3) (4)

X

Seati-Size

X

i-U (3) (4)

X

X = Seat not suitable for fitting child seats of this type.

IUF/IL = Seat enabling a child seat with "Universal/Semi-universal or vehicle-specific" approval to be attached by ISOFIX (on equipped vehicles): check that it can be fitted.

i-U = Suitable for "Universal" front-facing and rear-facing i-Size restraint devices.

i-UF = Suitable only for "Universal" front-facing and rear-facing i-Size restraint devices.

(1) A carrycot can be installed across the vehicle and it will take up at least two seats. Position the child with his or her feet nearest the door.

(2) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

(3) If necessary, position the vehicle seat as far back as possible and raise the seatback (by approximately 25°). Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.

( 4 ) In all situations, remove the headrest of the rear seat on which the child seat is positioned. This must be done before fitting the child seat (please refer to the "Rear headrests" pages in Section 3 of the vehicle user manual). Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.

The size of the ISOFIX child seat is indicated by a letter:

  • [B2, B3]: boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg);
  • F3, F2, F2X [A, B,B1]: for forward-facing seats in Group 1 (9 to 18 kg);
  • R3 ,R2 ,R2X [C, D]: rear-facing seats or shell seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);
  • R1 [E]: rear-facing shell seats in Group 0 (less than 10 kg) or Group 0+ (less than 13 kg);
  • L1, L2 [F, G]: carrycots in group 0 (less than 10 kg).
warning

(5) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that theairbag has been deactivated Child safety: deactivating, activating the front passenger airbag.

warning

(6) Deactivate the "Easy Access Seat" function before installing a child seat on the front passenger seat and/or on the rear seats.

Risk of injury.