Radio Connect R & GO 3

Audio settings

Display the settings menu by pressing . Select "Audio settings" by pressing on the panel or on the steering column, then or to confirm. The following settings are available:

• "Equaliser";
• "Spatialisation";
• "Volume mph (km/h)";
• « Bass boost » ;
• "Reset".

"Equaliser"

Select "Equaliser", then press or on the steering column to access the different sections in the following order:

• « Bass » ;
• « Middle » ;
• « Treble ».

"Spatialisation" (sound distribution)

• "Balance" (left/right sound distribution);
• depending on the vehicle; "Fader" (front/rear sound distribution).

You can change the value of each setting by pressing on the panel or on the steering column control.

Press or to confirm and return to the previous selection.

To exit the current menu, press .

"Volume sensitive to speed"

The volume of the audio system varies in relation to the vehicle speed.

Go to the "Audio settings" menu then confirm "Volume mph (km/h)" by pressing or .

To reach the desired setting, select one of the following:

• « OFF  » ;
• "Very low";
• « Low » ;
• « Middle » ;
• "High";
• « Very high ».

« Bass boost »

The "Bass boost" function can be used to increase the bass when listening at low volume.

To activate/deactivate this function, select "ON / OFF" using on the steering column control or on the panel, then press or to confirm.

"Default audio"

Display the "Audio settings" and select "Default" then Reset".

Select "YES" or "NO".

All the audio settings return to their default values.

Setting the time

This function allows you to set the time.

Display the settings menu by pressing . Select "Clock" by pressing on the steering column control or on the panel, then press or to confirm. The following settings are available:

• "Settings": set the hours and minutes;
• "Format": set the time display format to " 12h " or " 24h ».

Radio settings

Display the settings menu by pressing briefly on , then select "Radio Settings" by pressing on the steering column control or on the panel, then press to confirm. The available functions are as follows:

• « TA » ;
• « AF » ;
• "DR alerts";
• "Update FM list";
• "Update DR list";
• "Priority to DR".

« AF »

The frequency of an FM station changes according to the geographical area. Some stations use the RDS system, mainly for automatic retuning of the AF frequency while the vehicle is moving.

« TA »

When this feature is activated, your audio system searches for and automatically plays traffic bulletins as new reports are broadcast by some "FM" or "DR" radio stations.

To activate or deactivate this function:

• display the settings menu by pressing and holding on , then press to confirm;
• select "Radio settings" by pressing on the panel or on the steering column, then or to confirm;
• select "TA" by pressing on the panel or on the steering column, then or to confirm;
• select "ON" or "OFF" to activate or deactivate the " TA ».

Note: this feature is not available when using the AM band.

Select the "Traffic information" function then select another audio source if needed.

"DR alerts" (news bulletins)

When this function is activated, it is possible to automatically listen to news as it is broadcast by certain DR radio stations.

To activate or deactivate this function:

• display the settings menu by pressing and holding on , then press to confirm;
• select "Radio settings" by pressing on the steering column control or on the panel, then or to confirm;
• select "TA" by pressing on the panel or on the steering column, then or to confirm;
• select "ON" or "OFF" to activate or deactivate the "TA" function.

If you select other sources, when a new broadcast of the selected bulletin type is made, it will interrupt the other sources.

"Update the "FM" list

This feature allows you to perform an update of all FM stations in the area where you are located.

• Display the settings menu by pressing briefly on , select "Radio" by rotating on the panel, then press to confirm;
• select "Update FM list" by rotating on the panel, then press to confirm.

Automatic updating of the FM stations in the area will begin. The "Update FM list" is displayed.

When the update is complete, the "Update FM list" message appears on the screen.

Note:

• if another source is selected, the radio list update FMFM continues in the background;
• while listening to FM, you can also update the FM radio list by pressing and holding on .

"Update the "DR" list

Use this function to update all DR stations in the area where you are located:

• display the settings menu by pressing briefly on , select "Radio" by rotating on the panel, then press to confirm;
• select "Update DR list" by rotating on the panel, then press to confirm.

Automatic updating of the list of terrestrial digital radio stations in your area begins. The "Update DR list" message is displayed.

When the automatic frequency scan is finished, the "DR list updated" message is displayed.

Note: while listening to FM radio, you can also update the list of DR radio stations by pressing and holding on .

"Simulcast"

Depending on the country, this function switches from a DR station to the equivalent FM station if the digital signal is lost.

If the "FM/DR simulcast" is activated, there may be lag of a few seconds when switching from FM to DR or from DR to FM. A change in volume may occur.

The system will automatically switch back to DR as soon as the digital signal is received.

Note: during the simulcast, the source name is replaced by "DR (FM)".

"Priority to DR"

Depending on the country, this function allows you to select an FM station (if the radio station requested is also available in digital) and switch to the equivalent DR station to obtain better sound quality.

Note: when priority is given to DR, the source name is replaced by "FM (DR)".

Selecting a language

This function allows you to change the language of the audio system.

Access the "Language" section by pressing , select the desired language by pressing on the panel or on the steering column, then or to confirm.

Software version

Display the settings menu by pressing then scroll down to "software version". The software version or " Software " message is displayed on the screen.

To update the software, please contact an approved dealer.

"BT settings" ( Bluetooth® )

Access the "Phone" menu:

• press  ;
• select the "BT settings" section by pressing on the panel or on the steering column, then or to confirm.

The following settings are available:

• "Volume": adjust the volume of the ringtone or call audio;
• "Ringtones": activate the vehicle ringtone or the ringtone from the phone.

To adjust the ringtone volume while a Bluetooth® phone is connected to the audio system, select "Volume" by pressing on the panel or on the steering column, then to confirm.

A new sub-menu appears:

• "Ringtones";
• "Calls".

Select one of the two sections by pressing on the panel or on the steering column, then to confirm.

To activate the ringtone on the vehicle or Bluetooth® connected phone, select "Ringtonesby rotating and pressing on the audio system panel or by using on the steering column control.

A new sub-menu appears:

• « Vehicle » ;
• « Phone ».

Select one of the two sections by pressing on the panel or on the steering column, then to confirm.

Display radio text

Display the radio text menu by pressing and holding on . The audio system displays "Text available" on the screen.

The radio text display can contain a maximum of 64 characters.

Note: if the radio station that is currently playing cannot display radio text, the audio system screen displays "No messages".