new Renault Clio
To move the seat forwards or back
Lift and hold the handle 1 to unlock the seat.
Release the handle once the seat is in the correct position and ensure that the seat is locked.
To raise or lower the seat base
Move the lever 2 as many times as necessary upwards or downwards until the required position is reached.
To tilt the seatback
Lift handle 3 and tilt the seatback to the desired position. Release the handle at the desired position and make sure that it is locked.
warning
After making adjustments, make sure that the seatbacks are correctly locked in place.
warning
For safety reasons, carry out any adjustments while the vehicle is stationary.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
Nothing should be placed on the floor (area in front of the driver) as these objects may slide under the pedals during sudden braking manoeuvres, thus obstructing their use.
Heated seats
With the ignition on, you can activate the heated seats via the multimedia screen:
- pressing the
pictogram on the required seat for the first time activates the heating system at maximum power. Three switch-integrated warning lights are illuminated; - a second press decreases the heating to medium power. Two integrated warning lights are illuminated;
- a third press decreases the heating to minimum power. One integrated warning light is illuminated;
- a fourth press turns the heating off.
In order to avoid unnecessary energy consumption, the heated passenger seat can be deactivated automatically in the absence of an occupant.
Operating faults
When an operating fault is detected, the warning lights on the pictogram for the seat concerned will flash.
Consult an approved Dealer.