Tipper and platform identification plate

<?xml version="1.0" standalone="yes"?>

The flatbed has an identification plate (as shown in example A) showing the following information:

1.

Manufacturer name

2.

Bodywork model

Chapter

Description

<?xml version="1.0" standalone="yes"?>

Flatbed and platform versions

It consists of a chassis (also called sub-chassis or false chassis), attached to the chassis of the vehicle, on which the flatbed and the platform are assembled with the side boards open, thus permitting material to be unloaded to the right, to the left and/or to the rear.

Chapter

Introduction

<?xml version="1.0" standalone="yes"?>

This additional user manual contains information, instructions and everything required to understand and operate the tipper and platform versions produced by JPM.

Chapter

Welcome aboard your vehicle

<?xml version="1.0" standalone="yes"?>

This additional user manual provides information on tipper, platform and dropside (aluminium) versions.

The information provided in this document cancels and/or replaces and/or complements the information provided in the RENAULT basic user manual.

To help you, you will find the following symbols:

Chapter

Exterior sensors, signals and lighting

<?xml version="1.0" standalone="yes"?>

Rear load area ceiling 1

The light 1 comes on automatically when it detects movement within its detection zone. It remains on for approximately three minutes.

Chapter

Transporting objects

<?xml version="1.0" standalone="yes"?>
warning

Always position the heaviest items directly on the floor.

Use the lashing points on the luggage compartment floor, if these are fitted to the vehicle.

The luggage should be loaded in such a way that no items will be thrown forward and strike the occupants if the driver has to brake suddenly.

Chapter