This function is an additional driving aid for the safety of the vehicle occupants.

The purpose of the "Safe Passenger Exit" function is to alert the driver and/or passengers to the potential danger of opening their doors when the vehicle is stationary.

Using information from radars on either side of the rear bumper (area A), the system notifies the driver when another vehicle appears in detection zone B.

The function is enabled if:

• reverse gear is engaged;

As indicated by the arrows 1, ultrasonic detectors on the vehicle's bumpers help to find accessible parking spaces and facilitate parking manoeuvring.

Remove your hands from the steering wheel; It will only be possible to control:

Introduction

Ultrasonic sensors, indicated by arrows 1, are fitted in the bumpers to detect obstacles near the vehicle.

If installed on the vehicle, the four cameras (1, 2

Operation

When reverse gear is engaged, camera 1, located at the rear of the vehicle, transmits a view of the area behind the vehicle on the multimedia display2, accompanied by one to three templates 3, 4 or 5 (fixe

Introduction

The "Active driver assist" is a driving assistance system for use outside urban areas, on wide roads with visible markings.

The system consists of the following functions:

The speed limiter function controls the motor to help you not exceed the driving speed you have chosen, known as the speed limit.

The speed limiter function can be activated from 0 to 110 mph.