Front headlights

Changing bulbs

Your vehicle is fitted with LED lights, contact an Approved Dealer to have them replaced.

To avoid all risk of sparks:

• Ensure that the "energy consumers" (ceiling lights, etc.) are switched off before disconnecting or reconnecting a battery;
• when charging, switch off the charger before connecting or disconnecting the battery;
• do not place any metal objects on the battery as this may create a short circuit across the terminals;
• wait for at least five minutes after switching off the engine before disconnecting the battery;
• make sure that you reconnect the battery terminals

Before carrying out any towing, move the gearstick into the neutral position (position N on vehicles equipped with an automatic gearbox), unlock the steering column then release the parking brake.

The speed specified by current legislation for towing must always be observed.

If necessary, remove the wheel trim.

Remove it using the hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the valve 2.

In case of puncture

Depending on the vehicle, the following may be available:

The tools included in the tool kit A may vary depending on the vehicle.

After use, ensure the tools are correctly stored.