If the remote control or, depending on the vehicle, the card does not work

In some cases, the radio frequency remote control or the card may not work:

• card or radio frequency remote control battery worn or run flat, vehicle battery flat etc.
• use of electronic devices near to the remote control or card (e.g. mobile phone, etc.);
• the vehicle is located in a high electromagnetic radiation zone.

It is then possible:

Opening/closing from the outside

(depending on the vehicle)

Opening from the outside

(depending on the vehicle)

Unlock the door using the remote control or, depending on the vehicle, by turning the key in the lock 1. Then, pull the handle 2 towards you to open the door.

Opening/closing from the outside

General information

Radio frequency remote control A

1.

Ignition-starter key and door key.

General information

Depending on the vehicle, there are two types of card: card A or card B.

The V2Li system installed in the vehicle enables electrical devices to be supplied at 230 V, at a maximum power indicated on the 230 V socket flap 3. The power is drawn directly from the traction battery and distributed via the 230 V sockets installed in the vehicle 230 V sockets.

With your vehicle stationary and connected using your vehicle's charging cable, the Vehicle to Grid (V2G) charging allows you to redistribute the energy stored in your vehicle's battery to your home and to the power grid.

You must have a compatible two-way AC charging terminal and have subscribed to the V2G charging service. Please refer to the multimedia instructions for further information.

With the vehicle stationary, from the "Vehicle" world 2 on the multimedia screen 1, press the "Electric" menu 3 then the "Programme" tab to programme your vehicle charging.