Starting the vehicle using the battery from another vehicle

If the secondary "12 V" battery charge level is too low, it is possible to use the battery of another vehicle to re-activate and operate the hybrid system Starting, stopping the engine.

As the battery cannot be directly accessed, it is necessary to use the remote terminals located in the engine compartment.

To avoid all risk of sparks:

• Ensure that the "energy consumers" (ceiling lights, etc.) are switched off before disconnecting or reconnecting a battery;
• when charging, switch off the charger before connecting or disconnecting the battery;
• do not place any metal objects on the battery as this may create a short circuit across the terminals;
• wait for at least five minutes after switching off the engine before disconnecting the battery;
• make sure that you reconnect the battery terminals

Remove it using the hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the valve 2.

In case of puncture

Depending on the vehicle, the following may be available: