Using information from the sensors installed on each side of the rear bumper (area C), the function warns the driver :

• when another vehicle appears in the detection area A ;

and/or

The My Safety function can be used to deactivate or activate a set of driving assistance functions simultaneously.

Depending on the vehicle, you can configure the My Safety function from the multimedia screen by selecting the driving aid functions to be switched off as a group.

Depending on the vehicle, this is composed of :

When fitted to the vehicle, this system notifies the driver if one or more tyres lose pressure.

Fuel consumption is accredited in accordance with a standard regulatory method. Identical for all manufacturers, this enables vehicles to be compared with one another. Consumption in real time depends on vehicle usage conditions, the equipment fitted and the user’s driving style. To optimise fuel consumption, please refer to the following advice.

Depending on the vehicle, you will have various functions which enable you to lower your fuel consumption :

Your vehicle complies with criteria for recycling and recovering vehicles at the end of their service life, which entered into force in 2015.

Some parts of your vehicle have therefore been designed to facilitate future recycling.

These parts are easy to remove so that they can be recovered and reprocessed by recycling companies.

Your vehicle has been designed with respect for the environment in mind for its entire service life : during production, use and at the end of its life.

Manufacture

Your vehicle has been manufactured at a factory which complies with a policy to reduce the environmental impact on the surrounding areas (reduction of water and energy consumption, visual and noise pollution, atmospheric emissions and waste water ; sorting and reusing waste).

The following operating conditions should be avoided :

• driving for long periods when the low fuel level warning light is lit ;
• using leaded petrol ;
• using lubricant or fuel additives which are not approved.

Or operating faults such as :