" Programming engine start " menu

From the "Settings" menu, select the "Vehicle" tab.

This function enables you to program the engine to start, in order to heat or ventilate the passenger compartment up to 24 hours before using the vehicle.

" Driving Eco " menu

From the main menu, press "Car info", then "Driving Eco" to access the following information:

" Tyre pressure " menu

From the main menu, press "Car info" then the "Vehicle" tab.

The display on your vehicle's instrument panel informs you of any tyre inflation faults.

" Seats " menu

From the main menu, press "Settings", then "Seats" to access the functions and settings of your vehicle seats:

" Ambient lighting " menu

From the main menu, press "Settings" then, from the "Vehicle" tab, press "MULTI-SENSE".

Press "Configure mode" then select the "Driving lights" tab.

" MULTI-SENSE " menu

From the main menu, press "Settings" then the "Vehicle" tab to access "MULTI-SENSE". This menu lets you customise the behaviour of some on-board systems.

Selecting mode

" 360° Camera " menu

The vehicle is fitted with four cameras fitted at the front, in the side door mirrors and at the rear of the vehicle to offer you additional aid during difficult manoeuvres.

For more information, refer to the "360° view camera" section in the vehicle user manual.

Note: make sure that the cameras are not obscured (by dirt, mud, snow, etc.).

" Rear-view camera " menu

From the main menu, press "Settings" then the "Vehicle" tab and select "Parking assistance". Use this menu to configure the reversing camera.

For further information on the reversing camera, please see your vehicle user manual.

Note:

" Parking assistance " menu

From the main menu, press "Settings" then the "Vehicle" tab. Use this menu to access the park assist settings. Please refer to the vehicle user manual for further information.

" Driving assistance " menu

From the main menu, press "Settings" then the "Vehicle" tab. This menu enables you to set up the driving aids.