Towing: breakdown

Before any towing, including on a flatbed truck, set the gear control to N position, unlock the steering column and release the parking brake.

The speed specified by current legislation for towing must always be observed.

Wheel trim with concealed wheel bolts

Remove it using the hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near the valve 2.

In case of puncture

Depending on the vehicle, either an emergency spare wheel or a tyre inflation kit is provided Tyre inflation kit.

Tool kit storage

The tool kit 1 is located under the flap at the footwell of the front right-hand seat.

Label A

Open the driver's door to read it.

Tyre pressures should be checked when the tyres are cold.

Tyre and wheel safety

The tyres are the only contact between the vehicle and the road, so it is essential to keep them in good condition.

You must make sure that your tyres con- form to local road traffic regulations.

Maintaining the tyres

The tyres must be in good condition and the treads must have sufficient depth: tyres approved by our Technical Department have wear warning strips 1 which are indicators moulded into the tread at several points.