Advice on use

In some situations, (air conditioning off, air recirculation activated, ventilation speed at zero or low, etc.) you may notice that condensation starts to form on the windows and windscreen.

If there is condensation, use the "Clear View" function to remove it, then use the air conditioning in automatic mode to stop it forming again.

The controls

(depending on the vehicle)

1.

Adjusting the ventilation fan speed.

2.

"Clear View" function.

Controls

The controls will depend on the vehicle equipment level.

1.

Distribution of air.

2.

Switching air conditioning on or off.

1

Left-hand air vent

2

Left-hand side window demister vent

3

Windscreen demisting vents

4

Centre air vents

The MULTI-SENSE system provides a choice of three driving modes that can be used to control, depending on the vehicle: driving, ambient lighting and comfort:

System A

Operating principle

Ultrasonic sensors, indicated by arrows 1 are fitted in the rear bumper to "measure" the distance between the vehicle and an obstacle when the vehicle is reversing.

If fitted on the vehicle, the four cameras 1, 2 and 3 located in the front bumper, door mirrors and tailgate help you with difficult manoeuvres.

Operation

When the reverse gear is engaged, the camera 1 transmits a view of the area behind the vehicle to the multimedia screen 2 accompanied by two guide lines 3 and 4 (fixed and mobile).