Renault Express

Replacing windscreen wiper blades 2

To replace the wipers, first place them in the service position C.

Ignition switched off:

  • set the stalk 1 to position B (fast sweep function): the wiper blades will stop in the service position C away from the bonnet;
  • lift the wiper arm 4;
  • pivot the blade until it is positioned horizontally (movement G);

  • press the tab 3 and slide the wiper blade downwards until you release the hook 5 of the wiper arm (movement D);
  • slide the blade (movement E) then lift it (movement F) to release it.

Refitting

To refit the wiper blade, proceed in reverse order of removal. Make sure that the blade is correctly locked in position.

To return the blades to lowered position, make sure that the blades are folded down onto the windscreen then set the stalk 1 to position A (off): the windscreen wiper blades will fold into the bonnet when the ignition is switched on.

Replacing the rear screen wiper blade 7

  • With the ignition off, raise the wiper arm 6;
  • pivot the blade 7 until you meet some resistance;
  • pull the blade to release it (movement H).

Refitting

To refit the wiper blade, proceed in reverse order of removal. Make sure that the blade is correctly locked in position.

tip

Check the condition of the wiper blades. You are responsible for their service life:

  • clean the blades, windscreen and rear screen regularly with soapy water;
  • do not use them when the windscreen or rear screen is dry;
  • free them from the windscreen or rear screen when they have not been used for a long time.
warning

Before changing the rear wiper blade, make sure the stalk is in the stop position (deactivated).

Risk of injury.

warning
  • In frosty weather, make sure that the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).
  • Check the condition of the wiper blades.

Replace the wiper blades as soon as they begin to lose efficiency (approximately once a year).

Whilst changing the blade, take care not to drop the arm onto the window after it has been removed as this may break the window.