Remove tools or, depending on the vehicle, the tool kit.

To remove the tool kit 1 from the luggage compartment

Depending on the vehicle, it may be stored behind a flap. Open it. Undo wheel 2 and pull the tool kit towards you.

To reposition the tool kit position tool kit pin 4 into housing 3. Make sure the kit is correctly positioned so as to be able to tighten wheel 2.

The tools included in the tool kit depend on the vehicle.

Hubcap tool 5

To remove the wheel trims.

Guide bolt 6 (depending on vehicle)

To finish loosening or starting to tighten the wheel bolts.

Tow eye 7

Refer to the information on the “Towing: breakdown” in Section 5.

Wheel brace 8

To undo the wheel bolt and the emergency spare wheel cage nut.

Jack 9

Refer to Section 5 “Changing a wheel”.

Retaining belt (depending on vehicle)

After use, reposition it, making sure that it retains all components in the tool kit.

Do not leave the tools unsecured inside the vehicle as they may come loose under braking. After use, check that the tools are correctly clipped into the vehicle or, depending on the vehicle, into the tool kit, then position it correctly in its housing: risk of injury.

If wheel bolts are supplied in the tool kit, you must use these bolts only for the emergency spare wheel: refer to the label affixed to the emergency spare wheel.

The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs underneath the vehicle or to gain access to the underside of the vehicle.