Renault Express
Accessing the tools
The presence of the tools depends on the vehicle.
The tools are located in the luggage compartment.
Jack 1
To use the jack, loosen the nut 5. When replacing the jack, fold it correctly before replacing it in its position (make sure to put back the wheel brace). Tighten the nut 5 to secure the jack.
Hubcap tool 2
This tool is used to remove the wheel trims. Located behind the jack.
warning
Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, make sure the tools are correctly positioned in their mountings: risk of injury.
If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.
Wheelbrace 4
This locks and unlocks the wheel bolts and the access to emergency spare wheel.
warning
For your safety, the use of a jack not recommended by the manufacturer is strictly prohibited.
The jack is specific to the vehicle and used to change the wheels.
Under no circumstances should it be used:
- on another vehicle;
- to carry out a repair;
- to access the underside of the vehicle.
Risk of injury.
Risk of damage to the vehicle.