The presence of tools in tool kit A, B or C depends on the vehicle.

After use, ensure the tools are correctly stored.

Tool kit B is located in the tray underneath the emergency spare wheel

Tool kit C is located on the wall of the luggage compartment. It is held in place by one or, depending on the vehicle, two straps.

tip

After use, for location C, reposition the tools against the wall and tighten the strap or, depending on the vehicle, both straps.

Lever 1

This can be used to tighten or loosen the towing eye 5.

Jack 2

Fold it correctly before refitting it in its housing (ensure that the wheelbrace is correctly positioned).

Hubcap tool 3

This tool is used to remove the wheel trims.

Wheel bolt guide 4

To finish loosening or starting to tighten the wheel bolts.

Towing eye 5

Towing: breakdown

Wheelbrace 6

This can be used to lock or unlock the wheel bolts and the towing eye 5.

warning

Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing to reduce any risk of injury.

If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.

warning

For your safety, the use of a jack not recommended by the manufacturer is strictly prohibited.

The jack is specific to the vehicle and used to change the wheels.

Under no circumstances should it be used:

  • on another vehicle;
  • to carry out a repair;
  • to access the underside of the vehicle.

Risk of injury.

Risk of damage to the vehicle.